Terma One D Heating Element

ONE D – Matching D shape element for high End Dwellings – used as a heat source in electric towel rails, electric radiators and dual fuel towel rails.

£89.15

VAT INCLUDED

Clear
SKU: Terma-One-D-Heating-Element Categories: ,

Description

The Terma ONE D element is D shaped to match the profile and shape of the uprights on most standard chrome ladder rails – providing an element in a matching shape at the bottom of the rail. This is the Right hand version – so needs to sit on the right hand side of the towel rail – as the wire comes out of the back. If fitted on the left the wire will come out of the front.

2 heat settings 45¡c and 60¡c regulating the internal radiator temp, denoted by multi colour LED.
1x discreet underside button.
Frost & overheating protection.
No Timer*.
2hr drying function.
*Compatible with the Terma TTIR Infrared Controller: 7 day timer, portable ambient room thermostat.
86mm length from thread down.
310mm internal probe length.
Straight cable, no plug.
IPx5 (safe for use in bathroom). Class 1.

Wattage Selection Advice: To correctly choose the right wattage of element for your towel rail or radiator, you should look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts.

Electrification Advice: When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable dependant on their design and how the heat will cycle internally around the rail, so avoid electrifying certain models as they won’t work and this will not be the fault of the element.

Dual Fuel Advice: If you are buying a heating element to convert a towel rail for use as dual fuel (electric in the summer and central heating in the winter) it is important to remember to regularly bleed the towel rail, as on a central heating system air can build up inside.

A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels. This is just the same as you would not run a kettle dry, so remember to regularly bleed to avoid any risk.

Additional information

Size

, , , ,

Finish